Machine Features:

Low maintenance.Closed loop structure for low electrical noise(patent).

Untouched sensor and SCR system keep durable and low noise.

For added protection,the electrical components are located on the top of the machine.

Reduced vibration and improved accuracy are achieved using a five phase motor.

International standard components are uniformly used where possible,providing the user the option to source spare parts locally,spare parts are interchangeable.

The use of superior materrials and components(superior cast iron,linear slides and ball screws)ensure high rigidity,accuracy,and durability.

Multiple wire speeds for different cutting parameters and ease of wire installation.

The machine has been designed specifically to meet the needs of press and plastics tooling applications.

Control System Features:

PC Based industrial computer utilising EPROM technology for improved reliability and systems protection.

Two central processing units(CPU) to enable programming while cutting.

Graphical gap voltage display(patent)

Graphical programming system including such features as:mirror,move,rotate,divide,scale,zoom,line,circle,radii,standard/special

curve,gear,tangent of line and circle,trim,clear,off-set and smooth radius.,

Can accept DXF or G-Code from AutoCAD and other major CAD/CAM systems via floppy disk.

Optional scanning software or full scanning system available.

Programmable taper of up to 60 degrees.

Four-axis synthesis(different profile top to bottom).

2D or 3D cutting

simulation and real time machining trace.

Edge finding and auto centring.

Invert cutting(Invert the cutting path).

Initiate start point(can return to initial start hole position while wire broken).

Auto Back-off and manual Back-off or go back to last point,then resume cutting.

Pause cutting.Restart cutting.

System can memorises the point on the cutting path when an error occurs or when there is a wire breakage.It then can resume cutting from that point when the error is rectified.

Battery back up.Complete data relention.

Auto programming for jumping mold.

Graphically check any segment of the programmed path with the ZOOM function.

Auto reset of UV axis when the job is completed.

International G-Codes.switch between graphics and G-Code easily.

No load output voltage:105V.

The pulse width Ton:2,4,8,16,32,64,128μs.

Max. short-circuit current>8A.

Dimension of controller:600*600*1750mm

Other specifications:
Max. cutting speed:100mm2/min.
Optimum furface finish:Ra>2.0μm.
wire diameter:ф0.12~0.22mm
wire speed:4 levels adjustable
Dielectric solution:oil NG-1(1:20),Dielectric soap NG-1(1:20~25)
Max. working current:6A.
Power supply:1-N 50Hz/60Hz,220VAC or 3-N 50Hz,380VAC
Power consumption:less than 1.2KVA

-1-